Burntech BOFP-48P Installationshandbuch PDF herunterladen (Seite 10)

INSTALLATION (Continued)

3. When starting second layer, stagger blocks to the

first layer (see Figure 8). For the BOFP24-48, use 8

blocks to build the second layer. After laying out all

blocks, using a level, verify all the blocks are level.

Shim if necessary.

4 When starting the top layer, stagger blocks to the

layer below. Use 7 full blocks and one half block to

build the top layer (see Figure 9). After laying out all

blocks, using a level, verify all the blocks are level.

Shim if necessary.

5. Place 4 heat shield retaining brackets (longer of

the 2 types of brackets included with the BOFP-48

Series burner system) on the top layer of blocks in

the pattern shown in Figure 10.

Figure 10 - Heat Shield Retaining Brackets

(BOFP16-48 Shown)

Figure 9 - Top Layer (BOFP16-48 Shown)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Keine Kommentare

Burntech BOFP-48P Installationshandbuch Seite 10